EKO CALIBRATER — CALIBRATION JOB HANDOVER CARD

Support-preparation worksheet. Complete the blank fields for the actual instrument.
Job reference: ______  Date: ______  Technician: ______
Exact analyser model / label: ______
Firmware if known: ______  Intended software mode: ______
Browser and operating system: ______
Connection / cable / adapter: ______
Task requested: calculation / file generation / connection / hardware operation
For every reference sample:
Sample ID | cow/buffalo designation if required | reference FAT | reference SNF | corresponding instrument readings | unit/decimal check
______ | ______ | ______ | ______ | ______ | ______
Reference testing procedure and sample preparation record: ______
Blocked stage: port selection / connection / reading / calculation / download / writing
Exact software message and the action immediately before it: ______
Backup/verification requirements for the actual instrument, where relevant: ______
Separate the reference sample values from readings produced by the instrument. Do not fill unknown reference values with plausible guesses. Do not change between modes simply to bypass an error. Do not include passwords or unrelated personal details in screenshots. This card is a support-preparation aid; it does not replace the instrument instructions or confirm compatibility.
Software-specific preparation reference:
https://ekocalibrater.com/eko-milk-calibration